Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who loves the flexibility of gas cooktops but requires an oven to bake in? Find a dual-fuel range cooker that gives you the best of both worlds.
Many experienced home chefs favor gas cooktops due to their superior temperature control and ability to employ sophisticated cooking techniques, such as grilling. These powerful stoves are costly, especially if they require an extra gas connection and an electrician to install them.
What is a 13amp plug?
If you own a dual fuel range cooker (also called an electric and gas oven) then you'll require a suitably rated 13 amp plug. The plug should be wired by a qualified electrician into the cooker ring.
This ensures that the current flowing through the plug is safe and not too high, which could cause an electrical fire risk. The plug is equipped with a fuse that controls the current. The fuse will blow when it is overloaded. This protects the appliance from an overload of electricity.
The fuse is listed at 13 amps as indicated on the top of the plug. this indicates the maximum current that the plug can pass without causing harm to the appliance or overheating the socket. When replacing fuses, it's important to use the same amperage rating as the original. There is a risk of overheating a socket if you replace a fuse using a different rating.
A 13 amp fuse is likely to be a type of ceramic, which is very durable and can withstand the high temperatures generated by a range cooker. Ceramic elements are also fire-resistant, and therefore a better choice than other types.
There are several ways that a 13 amp plug could be installed. It could be wired to an existing live socket, and the flex is connected to it using either a screw or a jaw-type cord clamp. The plug must be put in place with a firm push and then tightened, making sure the cord clamp is secure.
Before connecting the wires, you may need to remove the cardboard wiring diagram that is placed over the pins of some plugs. It is essential that the wires are trimmed to the correct length as cutting them too long could cause them to break when the plug cover is replaced. The earth wire must be the longest one to ensure it is connected prior to the neutral and line pins.
How do I fit an outlet with 13amps?
The vast majority dual cookers that use fuel in the UK are equipped with a 13 amp plug. This is crucial because ovens can draw large amounts of current, while the standard plug sockets have a rating of 10 amps.
Generally speaking, new appliances must be equipped with plugs at the time of sale and this is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances may not have a plug connected and this is the problem.
When connecting a cooker to an existing plug socket, the first thing that needs doing is to ensure that the rating of the fuse inside the fuse box matches the plug's rating. This is crucial because a faulty fuse could be dangerous.
It is also recommended to check that the fuse has been completely seated into the cartridge, and there is no excessive movement. The next step is to prepare the flex that is to be used. Remove the sheathing to expose the three conductors that are insulated. Then, nick the sheathing at the entry point to the plug (beyond the cord grip) using a utility knife, without piercing the individual conductors that are insulated. The nick should be large enough to allow for the sheathing and cable to separate when the sheathing is pulled back. Finally cut off the excess sheathing leaving about 40mm extending beyond the flexing end.
The flex is positioned over the plug and the earth terminal is placed at the top and the neutral and live terminals at the bottom. The sheathing of each pin is removed using the coloured conductors as a guide. The internal cable is then secured to the terminal using the cord grip. If the plug is fitted with a screw-type cord clamp loosen it, and then pull back the insulation to reveal the copper conductors. Connect each wire insulated to the correct terminal using the channel in the plug. Begin with the earth conductor, then the neutral, and then the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw of the 13amp plug is 3kw at 230volts. This is a significant amount of power, but the standard fuse fitted in a UK plug will not fail until the cable is heated to a dangerous level. A defective plug or socket could result in a fire, therefore it is important to be aware of how much you are using particularly in the kitchen.
The fuse inside the plugtops are made of ceramic, around 25mm in length and 240V mains rated. The fuses will bear a BS Kitemark or a similar mark on the side, and they'll also contain sand. There are also cheaper glass or plastic alternatives, but they shouldn't be used with a live plug, unless you want to blow up the fuse and possibly get electrocuted!
In the UK the majority of dual fuel range cookers are wired. They cannot be plugged directly into the wall outlet. check over here are usually connected to a separate cooker ring circuit, which is only suitable for appliances that draw up to 20 amps.
Check the ring circuit at your home with the fuse box, or contact an electrician nearby. Ask whether the sockets are connected to the same ring or if they are separate. They should also be able tell you if there's a separate circuit to power your oven.
If you're in the market for a brand new dual fuel range cooker the size of your kitchen is an important aspect to take into consideration. We offer a broad selection of cookers that can be adapted to any space. Pick from compact 50-60cm dual fuel models or huge 90cm+ double oven options by leading brands such as Rangemaster and StovesAreUs.
We also offer a wide variety of multifunction gas and electric cookers. These multi-functional appliances allow you to cook a variety of meals like pasta, casseroles, and curries.
Explore our entire range of Cookers in Currys online or visit us in-store to take a look. We offer free home installation and delivery on selected range cookers and flexible payment options. Our team is on hand to answer any questions you may have. Contact us via email or by phone. Credit is subject to status and terms & conditions apply.
What is the maximum current draw of a cooker switch?
There is a lot of confusion about what the maximum current draw of a cooker switch actually is. The truth is that most cookers aren't designed to plug into a standard socket, but rather are hard wired and connected to a specific oven ring circuit. This is because they will often consume far more than 20 amps of power when both the gas hob and electric oven are being used.
There aren't any dual fuel range cookers that are able to be fitted in a standard socket since this could pose an extremely high risk of fire and violate electrical regulations. An experienced electrician will install any new electrical wiring to a cooker in the kitchen and will make sure that the load (both the oven and hob) will not exceed the capacity of supply of the circuit.
The benefits of a dual fuel cooker are the receptive heating of a gas cooktop along with the precision of an electric oven. They are therefore popular with both home cooks and chefs. Dual cookers that use fuel are great for experimenting with various cooking techniques, including searing or charcoaling.
When purchasing a new range cooker, you'll need to take into consideration several factors like size, function and cost. You will also need an electrical connection to your home for the appliance. If you're unsure then it's advisable to get an Gas Safe engineer inspect your property prior to installation.
The Currys range of dual fuel range cookers has options to suit a variety of budgets, from affordable models from Indesit and Zanussi to our exclusive Essentials collection. If you're looking for something a little more advanced We also have a wide selection of premium JennAir ranges, which come with several unique features.
It is crucial to read the instruction manual for the owner prior to purchasing a dual fuel range cooker. It will provide you with specific information regarding the electrical and gas requirements. You will need an electric connection to your home. A plumber might be required to install it for you. Based on the type of home you live in you'll also need to ensure that you have a dedicated cooker ring circuit installed and signed off by a qualified electrician.